Biamp ZONE4 Quad zone pre-amplifier
- Home
- Audio
- Public address and voice evacuation systems
- Multizone mixers
- Biamp ZONE4 Quad zone pre-amplifier
4-zone stereo pre-amplifier
| zone outputs | 4 stereo |
| MIC inputs | 3 x balanced |
| Phantom power | 18V (available on 2 inputs) |
| Line inputs | 4 x unbalanced |
| Source selection per zone | Yes |
| Remote control | RS232 |
| Priority input contact | Yes |
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.
There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.
The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. These control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.
On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.
The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
